Average Reviews:
(More customer reviews)Over last few years we replaced all desktops in the house by laptops. One day I decided to convert an old audio cassette into MP3 like I used to do on my desktop. I realized that it was not going to be possible as the 'line-in' input which was available on desktop was missing in all the three laptops in the house. After some futile tries of trying to record through mic-in, I started researching. I somehow stumbled upon this device and decided to give it a try. All I can say is this is EXACTLY what I was looking for. Here is what you need to do if you wish to convert audio cassette into MP3 -
You need -
1. Audio cable with one end 3.5 mm jack and other end with red & white L-R audio. You may have a spare A/V cable which comes with camera or dvd players etc. (W R and Yellow ends, you do not need to plug the Y end as it is for video)
(With 'line-in' on desktop, you simply needed an audio cable with 3.5 mm on both sides)
2. Boom box or tape deck (I used boom box)
3. U-Phono202 device
Plug the 3.5mm end of the cable in 'headphone out' of the boom box. Plug the L-R inputs in the L-R inputs of the U-Phono202 and plug it into a USB port of the laptop. Play the audio cassette. You cannot hear the sound through laptop speakers, you have to plug in the headphones in 'headphone out' of the U-Phno202 in order to hear the cassette playing.
If you are using Vista, right click on the speaker icon in the bottom tray and select 'recording devices', change the recording device to the '2USB Audio Codec' (at least that's how it shows up on mine).
I haven't yet used the packaged software. I useed Audacity instead. Open (or download if you have not) Audacity. Go to 'project', select 'new stereo track' and hit record. Whatever is playing on your boombox is now being recorded on your laptop. Hit stop when your recording is done. Export the project as 'Mp3', save it in your desired location.
I suggest making some few minute test recordings to make sure your recording sounds fine or you need to reduce/increase recording volume etc.
It worked exactly as above for me and worked perfectly too. The boombox gave a terrible hiss and an extremely annoying constant background noise while playing the cassette, however the U-Phono202 filtered almost 99% of it and the final MP3 sounds extremely clean.
I wrote detailed review as I had all these questions in my mind before I began searching for the right product. Hope this helps in case you are also looking for a solution to convert your cassettes to Mp3s. Thanks for reading.
UPDATE : UPhono202 is working perfectly fine! Just wanted to mention that if your recording appears over loud and there is jarring even after reducing boom box volume and the PC volume very low, here is what you shall do - Keep the boombox and computer volumes at decent levels but reduce the microphone input 'level' - Rightclick on the speaker icon in the tray. highlight the Uphono device. Click on properties. Select 'levels' tab and reduce the level all the way to 5 or 7 and then record your clip.
Click Here to see more reviews about: Behringer UFO202 Audio Interface
High-quality USB Audio Interface with Built-in Phono Preamp and Massive Software Package for Digitalizing Your Tapes and Vinyl Records
Click here for more information about Behringer UFO202 Audio Interface
No comments:
Post a Comment