7/22/2011

Seismic Audio - 2x12 GUITAR SPEAKER CAB EMPTY - 7 Ply Birch - 12" Speakerless Cabinet - 212 - Orange Tolex - Black Cloth Grill - Front or Rear Loading Options Review

Seismic Audio - 2x12 GUITAR SPEAKER CAB EMPTY - 7 Ply Birch - 12 Speakerless Cabinet - 212 - Orange Tolex - Black Cloth Grill - Front or Rear Loading Options
Average Reviews:

(More customer reviews)
I recently purchased a Seismic Audio 2-12 Speaker Cabinet to mount a couple of Eminence Legend 12 inch guitar speakers I had laying about. The cabinet was made of birch plywood with an orange tolex finish and a black grill and hardware. The cabinet comes with two jacks associated wiring and spade connections. This allows a number of speaker wiring combinations. I set mine up in parallel, that is two 8 ohm speakers wired + to + and - to - then to the jack for a 4 ohm installation over all. The jacks feel good when you plug into them and the wiring was well done.
The speaker installation was simple. I placed the speakers in the cutouts and centered them. I drilled small pilot holes and screwed in stainless pan head sheet metal screws to hold the speakers in place. If you look closely with the grill installed you can see a little sparkle from the pan heads inside. Make sure you orient the speaker lugs so you can get to them easily; there is an access slot in the back of the cabinet. Less hassle if you ever want to change your wiring around.
I fired this puppy up today and was pleased with its sound. The cabinet is an opened backed and I expected it to be a little lacking in low end thump. I was pleasantly surprised. You can play it clean or as dirty as you like, and it hung in there without coloring the tone. The slight upward rake to the speaker deck is a nice touch that lifts the speaker projection off the floor. What more can you ask?
The fit and finish was very good and the cabinet was solid though a bit lighter in weight than I expected. I am pleased with the purchase and would recommend it to anyone.


Click Here to see more reviews about: Seismic Audio - 2x12 GUITAR SPEAKER CAB EMPTY - 7 Ply Birch - 12" Speakerless Cabinet - 212 - Orange Tolex - Black Cloth Grill - Front or Rear Loading Options


Premium Plywood Tolex Covered Empty Guitar Cabinet

Model Number: Luke-2x12TR
Orange Tolex Cover
Black Color Cloth Grill
2x12" Empty Guitar Speaker Cabinet
Guitar Speakers are not included
Birch Plywood
Removable Grill for front speaker loading
Grill pops off and on with ease
Removable back panel for rear speaker loading
Plenty of wire to hook up the guitar speaker of your choice
Black Metal Handle on each side
Metal flush corners
Dual 1/4" connectors on the back
Light Weight Cabinet
28.6 pounds
LxWxH: 28.5" x 12.25" x 21.75"
Brand New
One year warranty

Our "Luke Series" Seismic Audio empty guitar cabinets are made of 1/2" Birch plywood on all 6 sides. These cabinets come loaded with everything you need except the speaker. We are very proud of the Luke series cabinets. These each have a wheat grill of various colors and are covered with a clean cut Tolex. The Luke series cabinets can be front loaded, as the front cloth grill is removable and easily reapplied. Some of the Luke series empty guitar cabinets cab be rear loaded as well(see above). Each cabinet comes with a dual 1/4" metal jack plate and plenty of wire to hook up your speaker. Each cabinet is well braced and offers a nice boutique look. We have three different models, an original look, modern look, and vintage look.The cabinet you will receive is described above.


Buy NowGet 47% OFF

Click here for more information about Seismic Audio - 2x12 GUITAR SPEAKER CAB EMPTY - 7 Ply Birch - 12" Speakerless Cabinet - 212 - Orange Tolex - Black Cloth Grill - Front or Rear Loading Options

No comments:

Post a Comment